Back to Blog
Buying Guides 2026-11-16 GUNNZO 0 views

Godhand Sanding Sponge Grits: Which Set to Choose

Godhand Sanding Sponge Grits: Which Set to Choose

Compare Godhand Kamiyasu sanding sponge grits and thicknesses to pick the right set for rough shaping, surface prep, or glossy polishing.

Start with the grit range, not the set name

The number on a Godhand Kamiyasu sanding sponge tells you how rough it is: the lower the number, the rougher the surface it leaves. So the first decision is not which set looks most complete, but where your work sits on that scale. If you are shaping or leveling a part, you want coarse grits. If you are refining a surface before paint, you want mid-range grits. If you are chasing a glossy finish, you want the ultra-fine end.

Thickness is the second decision. The 10mm sponges are the harder, thicker option, and the 5mm sponges are thinner. That difference changes how the sponge feels in hand and how it meets a flat surface, so it is worth matching thickness to the task rather than buying the biggest assortment.

The three sets side by side

  • GH-KS10-A3A: coarse to medium, 10mm: Includes #120, #240, and #400 grits, four pieces of each, in a 10mm thick harder sponge. This is the set for rough shaping and flattening before you move to finer grits.
  • GH-KS10-KB: ultra-fine polishing, 10mm: Includes #2000, #4000, #6000, #8000, and #10000 grits, one piece of each, in a 10mm thick harder sponge. This is the set for polishing and bringing up shine after the surface is already smooth.
  • GH-KS5-KB: ultra-fine polishing, 5mm: Includes the same five ultra-fine grits (#2000 through #10000), one piece of each, but in a thinner 5mm sponge. Choose this when you want the fine grits in a lower-profile pad.

What the coarse-to-medium set actually gives you

What the ultra-fine sets actually give you

How to decide between the 10mm and 5mm fine sets

  • Choose GH-KS10-KB if you want a harder, thicker pad for flat polishing: The 10mm sponge is described as harder than existing Kamiyasu, and the set is positioned for polishing with that thickness. It gives you more material to hold and a firmer feel on flat surfaces.
  • Choose GH-KS5-KB if you want the same grits in a thinner pad: The 5mm thickness is the only difference confirmed by the supplied information. If you prefer a lower-profile sponge for finer control, this is the version to pick.
  • Do not buy both fine sets just to compare: They share the same five grits. Unless you specifically want both thicknesses on hand, one fine set plus the coarse-to-medium set covers the full range from #120 to #10000.

A practical two-set combination

For most modelers, the cleanest buying decision is one coarse-to-medium set and one ultra-fine set. GH-KS10-A3A handles the rough work, and either GH-KS10-KB or GH-KS5-KB handles the polishing. That gives you every grit from #120 to #10000 without duplicating the fine grades.

If you only do light cleanup and never need to remove material, the coarse set is the one you can skip. If you only refine surfaces that are already close to final shape, start with a fine set and add the coarse set later.

What the supplied information does not settle

The records do not include a recommended grit sequence, pressure, or sanding time for any of these sponges, so treat the grit order as general guidance rather than a manufacturer procedure. They also do not confirm compatibility with specific paints, primers, or materials beyond the stated use for sanding and polishing.

The records note that the sponges use ink that is harder to smudge, so you can use them for wet sanding without worrying. Beyond that, no care or safety instructions are supplied, so check the packaging for any additional guidance before use.

Related Articles

Customer Service
Home
Products
Cart
Profile