GUNNZO

Mr. Color 漆 C51 半光澤膚色 10ml

Mr. Color 漆 C51 半光澤膚色 10ml - Main image
$2.15 $3.3 In stock

Mr.COLOR hobby paint is a paint that has long been regarded highly by modelers world wide as a model paint that delivers an outstanding finish. There are a large number of colors and color types available, which are suitable for painting almost all models.
Generally, Mr.Color provides a wider range of paint colors and finishes than Aqueous Hobby Color, and will dry to a smoother and harder finish.

  • The use of Mr Thinner is required to thin Mr. Color paint, both to thin paint if desired, and also to clean paint brushes and airbrushes. Mr Thinner is available in 3 types (standard Mr. Thinner, Mr.Rapid Thinner and also Mr.Levelling Thinner) and four sizes - 50ml, 110ml, 250ml and 400ml.
  • When applying Mr.Color paint, 1 to 2 coats are recommended when using paint brushes, and 2 to 3 coats if using an airbrush to spray paint.
  • If airbrushing Mr.Color paint, it should be thinned after diluting to a ratio of between 1 (Mr.Color) and 1 to 2 (Mr. Thinner), depending on the degree of paint viscosity required.
  • Gloss levels obtained using gloss coat Mr.Color hobby paints can be adjusted by using Flat Base - mix approximately 5 to 10% of C-30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.

Customer Reviews (4.6 / 5 · 5 reviews)

Miles ★★★★★

This is my go-to for any flesh tones now; the semi-gloss finish dries down smooth without that cheap plastic shine, and the coverage is solid after two thin coats. The 10ml bottle lasts a surprisingly long time for how little you need per figure.

Jacob B. ★★★★★

Took a chance on this for a custom skin tone mix and the semi-gloss finish laid down super smooth straight from the bottle. The 10ml size is perfect for a couple of figures, and it dried to a nice subtle sheen without needing a topcoat.

Penelope ★★★★★

Lid goes on tight, so the 10ml bottle survives a drop on the workbench without spilling. The flesh tone covers a resin head in two thin coats and the semi-gloss leaves just enough sheen for skin.