GUNNZO

Mr. Color 漆 C609 平光 JMSDF 防滑甲板灰 10ml

Mr. Color 漆 C609 平光 JMSDF 防滑甲板灰 10ml - Main image
$2.18 $3.3 In stock

Mr.COLOR hobby paint is a paint that has long been regarded highly by modelers world wide as a model paint that delivers an outstanding finish. There are a large number of colors and color types available, which are suitable for painting almost all models.
Generally, Mr.Color provides a wider range of paint colors and finishes than Aqueous Hobby Color, and will dry to a smoother and harder finish.

  • The use of Mr Thinner is required to thin Mr. Color paint, both to thin paint if desired, and also to clean paint brushes and airbrushes. Mr Thinner is available in 3 types (standard Mr. Thinner, Mr.Rapid Thinner and also Mr.Levelling Thinner) and four sizes - 50ml, 110ml, 250ml and 400ml.
  • When applying Mr.Color paint, 1 to 2 coats are recommended when using paint brushes, and 2 to 3 coats if using an airbrush to spray paint.
  • If airbrushing Mr.Color paint, it should be thinned after diluting to a ratio of between 1 (Mr.Color) and 1 to 2 (Mr. Thinner), depending on the degree of paint viscosity required.
  • Gloss levels obtained using gloss coat Mr.Color hobby paints can be adjusted by using Flat Base - mix approximately 5 to 10% of C-30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish. The percentage of Flat Base used can be adjusted to vary the amount of gloss level obtained.

Customer Reviews (4.4 / 5 · 5 reviews)

Penelope O. ★★★★★

I’ve gone through a lot of hobby paints over the years, but this 10ml bottle has such a consistent viscosity that it levels out beautifully on the model with barely any brush marks. The flat, cleated deck gray tone is a perfect match for ship deck details, and it dries to a nice matte finish that re

Benjamin ★★★★★

This gray is spot-on for JMSDF decks straight out of the bottle, and the coverage is so smooth I didn't even need a second coat over the primer. It's thin enough to airbrush without heavy thinning, yet it levels out flat without any brush marks on the details.

Daniel ★★★★★

Finally got a hull color that looks right straight from the bottle, the flat finish saved me a whole step of topcoating. Coverage is solid for a 10ml bottle, and it thins down smooth for airbrushing without any clumps.