Doraemon Entry Grade #04: A Quick Build Guide
By GUNNZO | Published: 2026-10-26
Category: How-to Guides
Learn how to build the Doraemon Entry Grade #04 model kit in minutes. This guide covers preparation, assembly, and finishing tips for beginners.
Quick Answer
Build the Doraemon Entry Grade #04 in about 15 minutes using only your hands—no glue or tools required. Follow the steps below for a clean, sturdy result.
Why Entry Grade Is Perfect for Beginners
The Entry Grade line from Bandai Spirits is designed for first-time builders. The Doraemon kit uses snap-fit parts, so you don't need cement or paint. This makes it an ideal introduction to model kits, especially for younger fans or anyone who wants a quick, satisfying project.
Because the kit is small at 3.15 inches tall, the parts are easy to handle. You can finish it in one sitting, which is great for building confidence before moving on to more complex grades like High Grade or Master Grade.
Step-by-Step Build Guide
- Prepare Your Workspace: Lay out the runners and check the instruction sheet. Ensure you have a clean, flat surface with good lighting. Separate parts by number to avoid confusion. A clutter-free area prevents losing small pieces.
- Snip Parts from Runners: Use a hobby nipper to cut parts from the runners, leaving a small nub. If you don't have a nipper, you can twist parts off gently, but this may leave marks. Cut away from the part to avoid stress marks.
- Clean the Nubs: Use a hobby knife or sandpaper to remove excess plastic from the cut points. For a seamless look, sand in one direction with fine grit (e.g., 600-1000). Smooth nubs make the kit look professionally finished.
- Assemble the Head and Body: Follow the instruction sheet to snap together the head and body sections. Press firmly until you hear a click. Avoid forcing parts—if they don't fit, check alignment. If a part resists, it's likely misaligned; don't force it.
- Attach Arms and Legs: Connect the limbs to the torso. Ensure the ball joints are fully seated for mobility. Test the movement by gently rotating the joints. Loose joints can be tightened with a tiny drop of glue or clear nail polish.
- Final Inspection and Display: Check all connections and clean any visible nubs. Pose Doraemon and place it on a shelf or desk. For extra protection, consider a display case. Regular dusting keeps the kit looking new.
Product Facts
- Doraemon Entry Grade #04 Doraemon: The Doraemon Entry Grade #04 kit requires no glue and stands 3.15 inches tall. You can assemble it right out of the box without extra supplies, making it a hassle-free project for beginners or a quick desk ornament.
Doraemon Entry Grade #04 Doraemon
