HG00 Cherudim Gundam GNHW/R Build Guide
By GUNNZO | Published: 2026-10-25
Category: How-to Guides
Step-by-step assembly tips for the HG00 Cherudim Gundam GNHW/R (Cherudim Saga) from Bandai's High Grade Build Fighters line.
Quick answer
Assemble the HG00 Cherudim Gundam GNHW/R by focusing on the head sensor gimmick and weapon attachments first, then apply decals and panel line for contrast.
Why the sensor and weapons come first
The Cherudim Saga’s head sensor opens and closes, which requires careful nub removal and paint if you want it to move smoothly. The seven different guns also demand attention to symmetry and alignment—rushing here can lead to loose or misaligned parts later.
Decal and finish considerations
The kit’s tactical gray scheme benefits from panel lining to bring out details. Stick to the included decals for the gray scheme; avoid adding too many aftermarket decals that might clash with the military look.
Step-by-step assembly
- 1. Prep the runner and tools: Cut parts with a sharp nipper, leaving a small nub. Use a hobby knife or sanding sponge to flush the nub. Common mistake: cutting too close can stress the plastic and create white stress marks.
- 2. Build the head and sensor mechanism: Assemble the head halves and test the sensor opening/closing before final assembly. If it sticks, sand the hinge pin slightly. Common mistake: forcing the sensor can break the small tabs. Check sensor movement before attaching the head to the body.
- 3. Assemble the torso and arms: Attach the shoulder joints and arms. The arms hold multiple weapon attachment points, so ensure pegs are fully seated. Common mistake: partial insertion causes loose arms later.
- 4. Build the seven weapons: Sort the seven guns by runner number. Assemble each one, taking care to match the correct halves. Common mistake: mixing up left and right halves for symmetrical weapons leads to incorrect alignment. Label each weapon with a sticky note to track which goes where.
- 5. Attach weapons and apply decals: Attach the guns to the arms and backpack as instructed. Apply the included decals using tweezers and a cotton swab. Common mistake: applying decals over panel lines can cause bubbles or peeling. Let decals dry 24 hours before handling.
- 6. Panel line and top coat: Use a fine-tip panel liner (gray or black) to bring out the gray scheme. Apply a matte top coat to protect decals and reduce shine. Common mistake: using too much panel liner can pool and ruin the finish. Wipe excess panel liner with a cotton swab lightly dampened with lighter fluid.
Product facts
- HG00 #048 Cherudim Gundam GNHW/R 1/144: The Cherudim Saga is a customized version of the Cherudim Gundam with a tactical gray scheme and seven different guns inspired by the 00 Gundam 7 Sword. You need to organize and identify each weapon type before assembly to avoid confusion during the build.
HG00 #048 Cherudim Gundam GNHW/R 1/144 - HG00 #048 Cherudim Gundam GNHW/R 1/144: The sensors on the head are recreated to open and close. Test the mechanism after assembly; if it feels stiff, lightly sand the hinge points for smoother movement.
