Building HGUC Zaku II F Type Solari: Step-by-Step Guide

Quick Answer

Assemble the HGUC Zaku II F Type Solari by following the Bandai manual, but pay extra attention to nub cleanup on the dark armor and the pre-order release timeline.

Step-by-Step Assembly

1. 1. Check Your Tools and Parts: Gather side cutters, a hobby knife, sanding sticks or glass file, and tweezers. Open the runners and verify all parts are present against the manual. The dark-colored armor parts will show nub marks more visibly, so prepare for careful cleanup. Missing parts? Contact the retailer immediately; Bandai does not replace individual runners.
2. 2. Cut and Clean Each Part: Cut parts from the runner leaving a small nub, then trim flush with a hobby knife. Sand or file the nub area until smooth. For the dark blue and gray armor, use a glass file to avoid whitening the plastic. Skip this step and nub marks will stand out on the dark plastic.
3. 3. Assemble the Torso and Head: Follow the manual to snap together the chest, backpack, and waist. The Zaku II's monoeye sticker can be tricky; use tweezers to position it precisely. Check that the head rotates freely before attaching the front armor. If the head feels tight, sand the neck peg slightly—do not force it.
4. 4. Build the Arms and Weapons: Assemble the shoulder, upper arm, forearm, and hands. The Zaku II F Type includes a machine gun and heat hawk. Ensure the weapon grips fit snugly into the hands; if loose, apply a thin layer of clear nail polish to the peg. Test fit the weapons before gluing anything—they may hold fine without modification.
5. 5. Build the Legs and Skirt Armor: Snap together the legs, including the knee joints and feet. The side skirt armor attaches via a small ball joint—be gentle to avoid breaking it. Pose the legs to check articulation before moving on. If a joint is too tight, sand the peg; if too loose, apply a drop of super glue and let it dry before reassembling.
6. 6. Final Assembly and Panel Lining: Attach all limbs to the torso. For panel lining, use a fine-tip Gundam Marker or Tamiya panel line accent color. Apply it to recessed lines, then wipe excess with a cotton swab dipped in lighter fluid. Let it dry completely before posing. Do not use enamel thinner on bare plastic—it can make the kit brittle.

Kit Facts

• [Pre-Order] HGUC #254-MS-06F Zaku ll F Type Solari [RFV]: This is a new pre-order item with a Japanese release month of June 2026 and estimated US availability 2–3 months later. You need to account for the shipping delay if ordering from outside Japan, and your order will not ship until this kit is in stock.